The Jewlery Box

This is the 5th jewelry box I have made. Over the years, I have added and changed features to perfect the design. This particular design is made of eastern maple with a black walnut inset as well as dovetail joints on the corners, the inside has an inset tray with blue felt flocking as well an oval mirror. Brass was used for the feet, the hinges, as well as a purchased lock and key.


This model of jewelry box was made for my fiancee at the time who is now my wife (Yes people, my wood craft skills are that good). Above you can see the black walnut inlay.

Above is a picture of the bottom of the jewelry box. The writing was done with a router that was set at 1/8th inch depth then filled with fiberglass. if you look closely, you can see the date 08 /06 / 26 the date I proposed.

One of the benefits of this project is that it becomes as complex and challenging as you want it to be. In its basic form, the box can be built in 10 hours and cost $5 to build. My total time on this project was 45 hours and cost was upwards of $100.

BCIT Education

I have received a few E-mails from people asking what education is required to become a Technology Education Teacher in BC.
As far as I know, the BCIT / UBC Partnership is the only accredited educational path available in BC.
(1 year) 18 credits university transferable credits
(2 years) British Columbia Institute of Technology (BCIT) for shop training
(1 year) University of British Columbia (UBC) for Bachelors of Education (B.Ed)

I am the youngest of 3 children in my family. By the time my parents paid for my older siblings education, vehicles, ect, there was no money set aside for me. I managed to save enough money to pay my way through by working and racking up debt on student loans, but the total cost from 2001-2005 was over $35,000

you can expect to pay more than that now as both the cost of living and tuition have gone up in Vancouver. This Shop Certification is valid in Australia, New Zealand, and The United Kingdom; as for Germany, I am not sure.

My time at UBC was a bit of a waste but i learned to perfect my skills while i was at BCIT. I completed many projects while at BCIT, Below is a picture of a CAD / CAM project, I also made a large shaker style kitchen table while there but have since misplaced the pictures.

This is a business card holder with a small picture of Mr. T on it. The image was drawn in AutoCad and converted to G code and cut on a CNC Machine. Stay tuned in September I will be documenting how to build your own CNC Machine.

Bird Cage

The second part of my blog will now focus on Metal Work.

This Bird Cage was the first of many metal projects that began in 2008 when I moved to Kwantlen. The objective of the project was to make a jig system that would allow equal spacing for all the bars as well as make the cage functional.
the cage is constructed of 1" round tube with 1/8" rod for the cage and 1/2" flat bar for extra support. there is a sheet metal try at the bottom to clean out the cage.
The spider web acts as a side door that works on a pin hinge.

After this prototype, 3 more cages were made but with less detail and more standard materials, mainly expanded steel and thinner metal tubing to cut costs.

I made this cage as a side project to keep myself occupied at work. When I first went to Kwantlen, there was not much that could be done. The Shop was built for "Weld and Fab".
In the days that follow, more posts will be dedicated to both Metal Projects as well as Shop Setup and Tool Boarding. As both were done in conjunction from 2008-2011.

Walking Cane

In the winter of 2008, my Grandfather was coming for a visit from England, I decided to make a Walking Cane. Although my family was not impressed with the project, a lot of time and care was placed into this cane. The Cane was made of Black Walnut with a strip of Maple down the center to provide some style. The handle was cast brass, threaded onto the cane.
The Cane is made in two pieces with brass fittings to join them together, you may find that over time the threading and un-threading of the cane will cause the 2 pieces to stop lining up.To solve this problem, add a paper shim.